Brake Components


Balance bar Wilwood 340-1757 Std with spherical joint RD3613 Reducing spacer (pr) RD3633 Std, machined pivot with integral reducing spacer PB-BB

1

Remote cable adjuster RD3611 340-4990

For use with balance bar for adjustment from the cockpit. Enables accurate balancing of front to rear brakes

1

Hydraulic Proportioning Valves Alternative method for adjusting brake bias


Wilwood lever 260-2400
Wilwood Knob 260-2220

1

Residual pressure valve These inline valves are used to maintain a minimum brake line pressure to help eliminate excessive pedal travel 260-1874 2lb (for discs) 260-1876 10lb (for drums)

1

RD3624 Hydraulic handbrake mount c/w master cylinder
RD6016 Lightweight alloy fly-off handbrake c/w ratchet

1

1

Brake fluid

DOT 4
DOT 5 Silicon
DOT 5.1 Synthetic

1

Master cylinders

Girling Remote reservoir master cylinders

GIR/R0625 5/8" bore
GIR/R0700 0.7" bore
GIR/R0750 3/4" bore
GIR/R0825PB 7/8" bore

1

Integral reservoir master cylinders

GIR/I0625 5/8" bore
GIR/I0700 0.7" bore
GIR/I0750 3/4" bore

1

Wilwood tandem master cylinder

This master cylinder overcomes the long pedal travel or incorrect brake bias problems normally caused by fitting large calipers to the front of the vehicle. This cylinder is 1. 1/16" bore and has a bias of 69% front, 31% rear and is designed to be fitted on the engine side of the bulkhead directly facing the brake pedal Part No. 260-4893 or complete with boot, retainer and push rod 260-4894

1

RESERVOIRS

GIR-001 Girling offset Reservoir
GIR-002 Girling offset Reservoir with level sensor
RES-Ext Plastic extension for integral reservoir master cylinder
RES-001 Direct fit reservoir for Girling remote master cylinder
RES-002 As RES-001 but smaller capacity
RES-006   Angled direct fit reservoir
RES-004 Twin outlet push fit with sensor (also can have 3rd take off)
RES-005 Tandem outlet push fit reservoir with sensor
RES-007  Single outlet push fit reservoir with sensor
B-RES Flexible braided reservoir hose, (Please specify length)
PB-001  Reservoir bracket
SPH8-4 Push fit reservoir hose 6mm (epdm purple cotton braid)
PB0031 Push fit hose Black 8mm (epdm)
PB0136 Pushfit adaptor for mastercylinder
Banjo Pushfit adaptor for mastercylinder
Historic style "Black tin" reservoirs sometimes available, please ring for details
1