GOODRIDGE 200 SERIES

These distinctive red and blue fittings feature a double seal arrangement to prevent seepage and a secondary swivel to allow independent alignment of each end of the assembly. This series is recommended wherever a strong, utterly reliable and lightweight professional installation is required. NB block forged fittings, up to dash 12, are strong and compact but where flow rate is critical use swept tube fittings.

Goodridge 200 hose

Lightweight flexible hose for use with a wide range of re-usable aluminum hose ends Construction: Seamless synthetic nitrile inner tube with partial cover stainless steel inner braid and a full cover corrosion and fire resistant high tensile stainless steel outer cover. Compatible with all fuels, oils and coolants; also alcohols including methanol and nitromethane. Temperature Range: -49Deg C to 150Deg C

1
Part hose hose Working Min bend
200-04 5.56 11.13 1000 51
200-05 6.35 12.70 1000 51
200-06 8.73 13.89 1000 64
200-07 9.52 15.09 1000 64
200-08 11.12 16.2 1000 89
200-10 14.27 20.2 1000 100
200-12 17.47 23.82 1000 115
200-20 28.70 36.49 500 205
200-24 34.92 43.28 250 230
200-28 38.10 46.99 300 255
200-16 22.22 29.36 750 140
200-32 45.24 53.19 200 320

ALLOY HOSE ENDS to suit 200 hose

1 1 1
Straight JIC Female 45 JIC Female swept 90 JIC Female swept
1 1 1
120 JIC Female swept 150 JIC Female swept 180 JIC Female swept
1 1 1
Tube mate 45 JIC Female forged 90 JIC Female forged
1 1 1
45 JIC Male forged 90 JIC Male forged Tee Male forged

1

Earls Ano-Tough

& Nickle plate

1

Available for Earls is a range similar to the above fittings to suit the same hose, but in a polished or in Black 'Ano-tough' finish, great alternatives to the traditional red and blue

Carburettor fittings for 200 Hose

New design helps to simplify some installations suitable for Weber or Delorto

banjo double
1 1 1
Twin hose end 2776-2106 Single hose end 2776-3106 Hose end to -6 male 2776-1106> Bolt, Weber M12x1.5 2776-06-m12D
Bolt, Delorto M12x1.25 2776-06-M122D
Washer CW901-06

Also available from Earls are male NPTF and male UNF hose ends please ring for details

GOODRIDGE 'G LINE'

These fittings and hoses are for the serious motorsport teams where the ultimate in professional plumbing and minimum weight is the priority. The exclusivity of these components is reflected in the price!

Both hoses are of convoluted PTFE construction, 110 hose having a high temperature heat stabilized terylene outer braid which is exceptional lightweight, whereas the 510 series hose has closely woven high tensile stainless steel outer but still retains high flexibility and high resistance to kinking and collapse. Both hoses are extremely flexible and lightweight, and are used with the reusable 4000 series fittings, or factory swaged 1000 series fittings for ultimate lightness.

Temperature range 110 Terylene outer -30c to 135c 510 Stainless outer -30c to 200c

1
Hose part Number ID mm OD mm op. Press (Bar) Min. Burst Press(Bar) Min. Bend mm Nom. Weight Kg/m
110-04 8.1 12.4 55 170 7 0.08
110-06 9.5 15.2 45 130 10 0.10
110-08 13.8 19.0 31 94 13 0.13
110-10 16.2 21.3 22 67 16 0.16
110-12 19.8 25.4 18 54 19 0.19
110-16 25.4 32.7 10 40 25 0.24
1
Hose part Number ID mm OD mm op. Press (Bar) Min. Burst Press(Bar) Min. Bend mm Nom. Weight Kg/m
510-04 8.1 12.4 70 600 7 0.09
510-06 9.5 15.2 70 530 10 0.14
510-08 13.8 19.0 70 330 13 0.20
510-10 16.2 21.3 50 230 16 0.23
510-12 19.8 25.4 35 185 19 0.28
510-16 25.4 32.7 33 133 25 0.35

Fittings for G line 110 and 510 hose

1 1 1
Straight Swaged 4001 Adjustable swaged 4401 45 Swaged 4046 Adjustable swaged 4446 90 Swaged 4091 Adjustable swaged 4491
1 1 1
120 Swaged 4120 Adjustable swaged 44120 150 Swaged 4150 Adjustable swaged 44150 180 Swaged 4180 Adjustable swaged 44180

G line 811 Series

811 Series hose is an original equipment version of Goodridge racing quality XF hose and is designed to be used with a new series of reusable fittings. These fittings use the conventional socket and olive attachment which is widely used for PTFE hose. Use 811 series hose if you do not have access to swage equipment. (this system replaces the original 4000 series reusable) 811 Offers all racers the advantages of the worlds leading lightweight flexible hose, the convoluted design allows tight radius bends without collapsing.

Part no ID OD Safe pressure Min Burst Pressure Min rad
mm mm Bar Bar mm
811-06 9.53 13.0 80 320 20
811-08 12.70 16.5 70 280 38
811-10 15.88 20.8 65 260 45
811-12 19.05 24.4 60 240 50
811-16 25.40 32.3 50 200 70
1 1 1
Straight 811-01 45 Swept 811-45 90 swept 811-90
1 1 1

45 Forged

812-45

90 Forged

812-90

811 hose
1 1 1

120

811-120

150 811-150 180 811-180

Quick release coupling

We are able to supply all Jiffy-Tite ™ motorsport quick disconnects. Jiffy-tite's revolutionary Quick Connect Fluid Fittings provide unsurpassed performance under extreme racing conditions. Made of lightweight, 6061-T6 aluminum, brass valves, and stainless steel ball bearings, they are corrosion resistant for extra long life.

Jiffy-tite Quick-Connect Fluid Fittings are safer than traditional threaded fittings. With threaded fittings there is always the risk that gas can leak or prompt a tragic spin-out or crash. Jiffy-tite’s unique, high-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected to protect against hazardous gas leaks or potential hot oil spills. Tested and proven to have a 100% leak proof seal, even at 200 psi, Jiffy-tite fittings are used by Pro Stock Champion, Warren Johnson, and the Frank Hawley Drag Racing School.

Jiffy-tite is the only Quick-Connect fitting on the market today approved for use in all categories of NHRA and IHRA. They are also accepted for use in SCCA for virtually ALL fuel, water, and oil systems. Fittings are currently available for all forms of high performance race and street applications.

Jiffy-tite supports drag racers everywhere. Jiffy-tite is a participant in the NHRA "Be a Winner" sweepstakes.

FEATURES:

    Lightweight, Compact
    Connects by Hand in Seconds
    100% Leak Tested
    Ribbed Collar Provides Slip Proof Use
    Available for ALL Fuel, Oil, and Water Applications
    Shut-off Features Available for Safety
    360 Swivel
    NHRA and IHRA Approved, SCCA Accepted
    Replaces Any Fitting in Any Location
    Black and Gold Anodized
    6061-T6 Aluminum and Brass Valve Construction


Jiffy-tite fluid fittings exceed flow requirements specific to each application while connecting and disconnecting with 100% accuracy. 

Jiffy-Tite are available with male Jic and Nptf or female ports and push on spouts sold as seperate parts so plug and socket can be suplied with different connections, also we can supply a rubber cover to prevent ingress of dirt when not connected, please ring for details
jt icon
jt plugJT JT socketJT

600 SERIES HOSE AND FITTINGS FOR FUEL AND OIL LINES

Not as flexible as 200 series hose and can only be used where a threaded connection can be made. Ideal for Turbo oil feeds or in dash 6 size for fuel feeds. Advantages include being physically smaller and able to withstand higher temperatures. Also no smell when using high grade fuels. An often overlooked alternative. Temperature range: -73c to 232c

1
600-06 7.93mm bore Working pressure 2500psi
1 1 1
6001 Straight female hose end 6046 45 degree female hose end 6091 90degree female hose end
1 1 1
6120 120 degree female hose end 6150 150 degree female hose end 6180 180degree female hose end

Swaged fittings available. Please ring for details

Other Fittings are available, if you don't see what you want please contact us, it may be available

Hardline system

This system uses HL836 series aluminium tube, it combines the strength and rigidity expected in a hardline but introduces it in a very lightweight from. Constructed of drawn aluminium tube with a polymide coating. It combines formability, form retention, low weight, high strength and corrosion resistance. It is useful for the transport of air, fuel and other fluids in automotive applications. This system requires no flaring of the tube and has a max working pressure of 95 bar.

1

1

1

HL821 Straight female HL831 Straight male HL841 Straight male bulkhead

1

1

1

HL811 Coupler HL854 'T' swivel on leg HL844 Bulkhead 'T'

1

1

1

HL814 Tee piece HL843 90 Male bulkhead HL822 45 Deg female swivel

1

1

1

HL823 90 Deg female swivel HL824 'T' swivel on run HL591 Banjo

1

1

HL598 Double banjo HL836 Hardline tube